Loading... Please wait...

Ag Wire Blog Spot

5 Tips for reducing spray drift

Posted



One of the major problems challenging pesticide applicators is spray drift. Spray drift not only results in wasting expensive pesticides and pollution of the environment, it may damage non-target crops nearby, and poses a serious health risk to people living in areas where drift is occurring. 

Although complete elimination of spray drift is impossible, problems can be reduced significantly if you are aware of major factors that influence drift, and take precautions to minimize their influence on off-target movement of droplets. The factors that play a role in either the creation, or reduction of spray drift are: a) Spray characteristics, such as volatility and viscosity of pesticide formulation; b) Equipment and application techniques used for spraying pesticides; c) Weather conditions at the time of application (wind speed and direction, temperature, relative humidity and stability of air around the application site); and most importantly, d) Operator care, attitude and skill. Here are five cost-effective tips on how to minimize spray drift.

1. If you can, keep your nozzles as close to the target as possible while still producing a uniform distribution of spray on the target. This doesn’t cost any money as long as it is practical to make it happen.

2. When you’re ready to change nozzles, consider selecting nozzles that produce much fewer of the extremely small droplets that are most likely to drift away. Low-drift nozzles are in the market and do a tremendous job of eliminating extremely small, drift-prone droplets from the droplet spectrum.

3. There are chemicals sold in the market that are designed to increase the droplet size, and reduce the number of very small droplets when added into the spray mixture. Most of them are some sort of polymer that tends to increase the viscosity and density of the spray mixture, which leads to larger droplets. This, however, should be the last defense against drift. First consider the other option such as better targeting of the spray and switching to low-drift nozzles.

4. Use shields that cover partially or fully the distance between the target and the nozzles. There are companies manufacturing and selling such attachments to the boom. Shields prevent small droplets from moving away from the immediate application area. This, however may not be practical for sprayers with extremely large booms.

5. If there are any doubts about a spraying job that might result in drift, wait until there is no longer that element of doubt. Always pay attention to wind direction and magnitude. The best investment you can make is to buy a wind meter that tells you how high the wind velocity is at any given time. Having a wind meter handy will help you avoid a costly problem associated with spray drift.

More detailed discussion on these tips and other drift reduction strategies are outlined in following OSUE Extension Fact Sheets available online:

Originally posted by Ohio State University.

Shop Teejet Spray Nozzles

View Comments


Greenleaf EasyFlow Closed Transfer System Kit

The easyFlow is the first closed, contamination-avoiding and self-cleaning transfer system for liquid plant protection products from sealed or non-sealed small PPP containers enabling the user to do partial or complete dosing. The easyFlow system is designed to fulfill all standards of environmental protection and operational safety today and in the future.In comparison to previous [...]

Read More »


Master MFG Gardener Rechargeable Cart Sprayer — 12V, 9 Gal

Master MFG Gardener Rechargeable Cart Sprayer Master Gardener Rechargeable Cart Sprayer is a versatile multi-use sprayer that offers a spray width of up to 50in. with its front mounted broadcast nozzle. The powerful sprayer delivers up to a 15-ft. vertical and a 20-ft. horizontal spray with 18in. handgun. Rolls on heavy-duty 12in. wheels and can [...]

Read More »


TeeJet Matrix 430 GPS Guidance System - NEW

Easy-to-Use, Low-Cost, Graphical Guidance SystemGPS guidance is no longer too complicated or too costly. Easy operation and affordable pricing make Matrix 430 the best value in GPS guidance. An on-screen lightbar plus coverage mapping reduce skips and overlaps to maximize crop protection. Matrix 430 is a great upgrade from foam markers and lightbars for spraying [...]

Read More »


MP FRX75 Self Priming Pump for low cost DEF Pumping

Looking for a low cost, high flow system for pumping DEF?  Take a look at the MPDEFKIT from Agrimart.net.  It features the MP FRX75 self priming all stainless steel pump with 12 volt motor.  Also included in the kit is a 3/4" x 12' GPI DEF fuel hose, and a 1" Banjo manual valve with [...]

Read More »


Envizio Pro II by Raven

Looking to add guidance and rate control in one complete monitor?  Look no further than the Envizio Pro II field computer by Raven.  Some of the highlight features of the Envizio Pro II include:-Bright, non-glare 6.5" touchscreen-Ability to be installed and used for guidance only or used for guidance and rate control-Rate control on up [...]

Read More »


Safeguard Blockage Monitor By Micro-trak Systems

SafeGuard™ electronically detects blockages and alerts you with an Audible Alarm and a Visual Display of the blocked row's number. Reduce over and under-application, save money, and apply liquid fertilizer with confidence without having to watch flow monitors or outlets.SafeGuard Console:Compact in-cab display that monitors, identifies, and reacts with lightning speed to immediately alert you [...]

Read More »


Continental NH3 Anhydrous Ammonia Valves

Buying NH3 (Anhydrous Ammonia) agricultural products from Continental NH3 means you are buying quality, tested equipment. All of our products are made from extremely durable materials ensuring long lasting trouble-free service. We thoroughly test our anhydrous ammonia agricultural products, such as our safety relief valves and manifolds, before shipping to make sure they function properly [...]

Read More »


Raven Accuboom --- Automatic Boom Section Control

Raven Accuboom provides automatic boom section shutoff for self propelled and pull type sprayers.Add Raven Accuboom to any sprayer with a Raven SCS spray controller, or a Raven Field Computer (Envizio Pro, Envizio Pro II, Envizio Pro XL, Viper Pro, Viper 4).  Note: if you just have a Raven SCS spray controller, you must add [...]

Read More »


Raven Smartrax MD

Raven's Smartrax MD is a high performance, mechanical driven autosteer solution.  Smartrax MD fits a wide variety of applications, from small tractors, all the way up to 3 wheel floater type applicators.  It is very simple to install, and offers very quiet performance.  Raven Smartrax MD is also compatible with most all Raven Field Computers, [...]

Read More »



Hide

Recently
Viewed

+