Need Help? Call: 888.374.2219
Petroleum 8 self-priming centrifugal pumps are capable of creating vacuum sufficient to lift liquids from heights up to 25 feet above the source. To handle many different fuels, the Petroleum 8 is available in three distinct models: PO, PG and PE 8.
A Petroleum 8 PumPAK® is a fully assembled and run tested pump end that can be easily coupled to a number of drivers such as hydraulic motors, 56C and 145TC frame motors and gas engines. A bearing pedestal is also available for T-frame motor or belt drive.
Standard features include SS drive sleeve, SS fasteners, renewable wear plate, and a semi-open dynamically balanced impeller.
|Suction and Discharge||2" x 2" NPT|
|Flow||Up to 150 GPM|
|Head Feet||Up to 100'|
|Impeller||PE 8 - semi-open cast iron, 316 SS (optional)|
|PG 8 - semi-open cast iron, aluminum (optional)|
|PO 8 - semi-open cast iron|
|Motor||Up to 3 HP|
|Drive Options||Close coupled 145TC|
|Close coupled 56C|
|Engine mount 6.5 HP (JD ENGINE)|
|Hydraulic motor .22 cu. in.|
|Hydraulic motor .37 cu. in.|
|Hydraulic motor .45 cu. in.|
|PumPAK® (without motor)|
|Seal||PE 8 - carbon / silicon carbide / Viton|
|PG 8 - carbon / silicon carbide / Viton|
|PO 8 - carbon / Ni-Resist / Viton|